Hotone Ampero II Stage Case Bundle
Bundle offer comprising
Hotone Ampero II Stage
Multi-Effect Pedal for Electric Guitar
- Modelling Trial DSP effects processor
- Up to 12 effects simultaneously
- Over 460 effects
- Over 90 amp models
- 68 cab models
- Over 100 pedal models
- Microphone type and position modelling
- Support of additional (third-party) Impulse Responses (IR Loader) via HoTone Editor
- Supports native NAM A2 Lite files (a firmware update may be required)
- 24-bit signal processing bis 127dB S/N ratio
- Built-in looper with max. 60 seconds recording time
- Built-in drum module
- Acoustic guitar simulation
- USB port for editing the IRs/effects or for using the Ampero as a USB audio interface
- Controls: Volume, Menu/Value, three rotary controls for touchscreen operation
- LED: Light ring around all footswitches, status bar
- Display: 5" touchscreen with a resolution of 800 x 480 px
- Footswitch: Eight switches
- Ground Lift switch
- Power consumption: 500 mA
- Power via a 9/18 V DC power supply (included)
- Dimensions (W x D x H): 301 x 180 x 58 mm
- Weight: 1.9 kg
Connectors:
- Input: 6.3 mm jack
- Two external effect inputs, each with a 6.3 mm jack
- LR/TRS combo socket with built-in microphone preamp, phantom power and five input modes
- Unbalanced stereo FX loop return socket: 2x 6.3 mm jack
- Two unbalanced outputs: 6.3 mm jack (one on each)
- Two XLR outputs
- AUX input: 3.5 mm jack
- Headphone connector: 3.5 mm jack
- MIDI input: 3.5 mm jack
- MIDI output: 3.5 mm jack
- USB-C port
- Power supply connection: Barrel connector 5.5 x 2.1 mm, centre negative
Note: Battery operation is not supported.
Thomann Inlay Hotone Ampero II Stage
Foam Inlay
- Milled foam inlay
- Suitable for Flyht Pro WP Safe Box 4 IP65 (internal dimensions: 395 x 320 x 117 mm)
- Custom-made for the Hotone Ampero II Stage
- With accessory compartment
- Dimensions inlay (W x D x H): 390 x 316 x 100 mm
- Weight: 0.4 kg
- Colour: Black / Turquoise
- Made in Germany
Flyht Pro WP Safe Box 4 IP65
Safe Box
- Protection class: IP65
- Waterproof, dustproof and airtight transport case
- Sturdy handle
- Impact-resistant hard plastic housing
- Rubber seal
- Front valve for pressure equalisation
- Fixed locking latch
- Convoluted foam and die-cut foam cubes on the bottom
- Can be used at temperatures from -25 °C to + 75 °C
- Dimensions (L x W x H): 430 x 380 x 154 mm
- Dimensions inside (L x W x H): 395 x 320 x 117 mm
- Material: Polypropylene (PP)
- Weight 3.10 kg
- Suitable variable inlay: Article no. 480978 (not included)
-
K dostání od Srpen 2024
-
Číslo produktu 597724
-
Prodejní jednotka 1 ks
-
Design Floorboard
-
Tube(s) No
-
Amp Modeling Yes
-
Effects Yes
-
Headphone Output Yes
-
Direct Out Yes
-
MIDI Interface Yes
-
Integrated Expression Pedal No
-
Connections for Pedals or Switches Yes
-
Aux-Input Yes
-
Integrated Tuner Yes
-
USB-Port Yes
-
Drum-Computer No
-
Incl. Tuner Yes
-
Line Out Yes
-
PSU included Yes
-
