K obsahu stránky

Spacer Rings for Machine Head Buttons

  • 25 White distance rings and washers each
  • For mounting between the housing and the button of a closed-type guitar machine head, thus creating more spacing between the button and the headstock edge
  • For electric and acoustic guitars
  • Diameter black (inside / outside): 4.1 / 5.8 mm
  • Diameter white (inside / outside): 4.05 / 6.3 mm
  • K dostání od Říjen 2012
  • Číslo produktu 295323
  • Prodejní jednotka 1 ks
158 Kč
Všechny ceny vč. DPH
Na skladě
1

82 Hodnocení zákazníků

4.7 / 5

Zpracování

38 Recenze

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
Smooth Runnings!
Anonymní 29.08.2015
Firstly Thomann is THE only place I've found that sells these near-on-impossible to find spacers and washers, after years of searching one day I just stumble upon these while browsing for other parts....imagine my delight!

I like to have my tuning buttons screwed in reasonably tight to help with tuning stability but this has it's downsides namely even the slightest overtighten can result in the plastic spacer/crush washer splitting, therefore coming off as you tune up, especially in vintage guitars where the plastic/nylon slightly degrades.
I have a box half full of donor tuning pegs which hace keept me in (used) replacements...until they ran out and I had to manage with tuning pegs looser than desirable, well no more!! I can testify t0 the quality of these Goeldo parts as I've installed them on 3 tuners now and they fit perfectly, turn smoothly and are made of what seems very durable nylon/plastic.

Very happy!
Zpracování
1
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
GK
Good but not for bass
George Konstantine 24.01.2014
These are very well made, good quality.
It is difficult in general, to find them for sale.
My only issue with them is that they are not the correct size
to use for bass tuners. They are made for guitar. This is not
specified when buying them. Hence the 4 star total.
Zpracování
4
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
b
excellent
billggk 24.03.2021
I have for years a broken distance ring the white one in my explorer with Grover tuners and I used O rings but they wear all the time this set fits perfect
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
Helped me a lot
Anonymní 20.02.2017
I bought this set in order to repair a machine-head on my Schecter Hellraiser C-7.

It is a perfect replacement for default distance ring, and now the machine head works precisely as it should. No problems with tuning at all.

Strongly recommended for those, who face the same problem. It is much cheaper to buy a set of these rings than a single machine head.
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení