Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
Be wary, these are some truly miniscule screws
I've seen other reviewers saying they expected bigger screws but these should fit most **shallow/flat** humbucker frames with no problem. Despite their size they were still able to get a good grip into the 3 ply pickguard on my guitar. Nice one HB.
0
0
Ohlásit hodnocení
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
H
The screw heads are tiny
I ordered these screws to go with Harley Benton's own pickup mounting rings but they looked really off as the screw heads are smaller than the holes on the pickup rings. The shorter screws are also even shorter than standard pickup ring screws so they barely go into the guitar.
0
0
Ohlásit hodnocení
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
i
Not so surprising twist
Good for shallow humbucker frames, finish seems to resist corrosion, will go in if you turn them clockwise, and out if you turn them counter clockwise.
1
0
Ohlásit hodnocení
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
S
Useless - too short and too small
Useless - too short and too small. It's not even long enough to use for neck humbucker frame. It was a waste of money.
Guitar - Jackson King V with Floyd Rose
Guitar - Jackson King V with Floyd Rose
0
0
Ohlásit hodnocení
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
Ci
Nice
I get these purely for aesthetic reasons. The smaller flat top screws look so much better than the bigger dome headed screws. I use these on truss rod covers, humbucker frames, cover plates, and pickguards.
0
0
Ohlásit hodnocení
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
IS
Can't use as they are thinner than original ones on Gibson, Dean and others US guitars
0
0
Ohlásit hodnocení
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
R
Do not fit the CST-24
Threads are too thin for the CST-24 mounting holes, considerably smaller than the stock screws.
0
0
Ohlásit hodnocení
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
t
Worth your buck
These worked just fine on the back side of my guitar to lock down my wiring plates.
0
0
Ohlásit hodnocení
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
B
Exactly right
Used these to replace broken humbucker rings on my Vintage v100 guitar.
0
0
Ohlásit hodnocení
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
IC
Fair I guess
I mean, they're screws right?
They worked with no apparent issues.
I don't have the guitar I put them on anymore, but I tend to think they're still there... Screwing...
They worked with no apparent issues.
I don't have the guitar I put them on anymore, but I tend to think they're still there... Screwing...
0
0
Ohlásit hodnocení